Fail-operational systems are a prerequisite for autonomous driving. Without a driver who can act as a fallback solution in a critical failure scenario, the system has to be able to mitigate failures on its own and keep critical applications operational. To reduce redundancy cost, graceful degradation can be applied by repurposing hardware resources at run-time. Critical applications can be kept operational by starting passive backups and shutting down non-critical applications instead to make sufficient resources available. In order to design such systems efficiently, the degradation effects on reliability and cost savings have to be analyzed. In this paper we present our approach to formally analyze the impact of graceful degradation on the reliability of critical and non-critical applications. We then quantify the effect of graceful degradation on the reliability of both critical and non-critical applications in distributed automotive systems and compare the achieved cost reduction with conventional redundancy approaches. In our experiments redundancy overhead could be reduced by 80% compared to active redundancy in a scenario with a balanced mix of critical and non-critical applications using our graceful degradation approach Overall, we present a detailed reliability and cost analysis of graceful degradation in distributed automotive systems. Our findings confirm that using graceful degradation can tremendously reduce cost compared to conventional redundancy approaches with no negative impact on the redundancy of critical applications if a reliability reduction of non-critical applications can be accepted. Our results show that a trade-off between the impact of the degradation on the reliability of non-critical applications and cost reduction has to be made.
相關內容
Byzantine fault-tolerant (BFT) systems are able to maintain the availability and integrity of IoT systems, in presence of failure of individual components, random data corruption or malicious attacks. Fault-tolerant systems in general are essential in assuring continuity of service for mission critical applications. However, their implementation may be challenging and expensive. In this study, IoT Systems with Byzantine Fault-Tolerance are considered. Analytical models and solutions are presented as well as a detailed analysis for the evaluation of the availability. Byzantine Fault Tolerance is particularly important for blockchain mechanisms, and in turn for IoT, since it can provide a secure, reliable and decentralized infrastructure for IoT devices to communicate and transact with each other. The proposed model is based on continuous-time Markov chains, and it analyses the availability of Byzantine Fault-Tolerant systems. While the availability model is based on a continuous-time Markov chain where the breakdown and repair times follow exponential distributions, the number of the Byzantine nodes in the network studied follows various distributions. The numerical results presented report availability as a function of the number of participants and the relative number of honest actors in the system. It can be concluded from the model that there is a non-linear relationship between the number of servers and network availability; i.e. the availability is inversely proportional to the number of nodes in the system. This relationship is further strengthened as the ratio of break-down rate over repair rate increases.
Context. Algorithmic racism is the term used to describe the behavior of technological solutions that constrains users based on their ethnicity. Lately, various data-driven software systems have been reported to discriminate against Black people, either for the use of biased data sets or due to the prejudice propagated by software professionals in their code. As a result, Black people are experiencing disadvantages in accessing technology-based services, such as housing, banking, and law enforcement. Goal. This study aims to explore algorithmic racism from the perspective of software professionals. Method. A survey questionnaire was applied to explore the understanding of software practitioners on algorithmic racism, and data analysis was conducted using descriptive statistics and coding techniques. Results. We obtained answers from a sample of 73 software professionals discussing their understanding and perspectives on algorithmic racism in software development. Our results demonstrate that the effects of algorithmic racism are well-known among practitioners. However, there is no consensus on how the problem can be effectively addressed in software engineering. In this paper, some solutions to the problem are proposed based on the professionals' narratives. Conclusion. Combining technical and social strategies, including training on structural racism for software professionals, is the most promising way to address the algorithmic racism problem and its effects on the software solutions delivered to our society.
Hedging is a strategy for softening the impact of a statement in conversation. In reducing the strength of an expression, it may help to avoid embarrassment (more technically, ``face threat'') to one's listener. For this reason, it is often found in contexts of instruction, such as tutoring. In this work, we develop a model of hedge generation based on i) fine-tuning state-of-the-art language models trained on human-human tutoring data, followed by ii) reranking to select the candidate that best matches the expected hedging strategy within a candidate pool using a hedge classifier. We apply this method to a natural peer-tutoring corpus containing a significant number of disfluencies, repetitions, and repairs. The results show that generation in this noisy environment is feasible with reranking. By conducting an error analysis for both approaches, we reveal the challenges faced by systems attempting to accomplish both social and task-oriented goals in conversation.
The stochastic dynamic matching problem has recently drawn attention in the stochastic-modeling community due to its numerous applications, ranging from supply-chain management to kidney exchange programs. In this paper, we consider a matching problem in which items of different classes arrive according to independent Poisson processes. Unmatched items are stored in a queue, and compatibility constraints are described by a simple graph on the classes, so that two items can be matched if their classes are neighbors in the graph. We analyze the efficiency of matching policies, not only in terms of system stability, but also in terms of matching rates between different classes. Our results rely on the observation that, under any stable policy, the matching rates satisfy a conservation equation that equates the arrival and departure rates of each item class. Our main contributions are threefold. We first introduce a mapping between the dimension of the solution set of this conservation equation, the structure of the compatibility graph, and the existence of a stable policy. In particular, this allows us to derive a necessary and sufficient stability condition that is verifiable in polynomial time. Secondly, we describe the convex polytope of non-negative solutions of the conservation equation. When this polytope is reduced to a single point, we give a closed-form expression of the solution; in general, we characterize the vertices of this polytope using again the graph structure. Lastly, we show that greedy policies cannot, in general, achieve every point in the polytope. In contrast, non-greedy policies can reach any point of the interior of this polytope, and we give a condition for these policies to also reach the boundary of the polytope.
Rich sources of variability in natural speech present significant challenges to current data intensive speech recognition technologies. To model both speaker and environment level diversity, this paper proposes a novel Bayesian factorised speaker-environment adaptive training and test time adaptation approach for Conformer ASR models. Speaker and environment level characteristics are separately modeled using compact hidden output transforms, which are then linearly or hierarchically combined to represent any speaker-environment combination. Bayesian learning is further utilized to model the adaptation parameter uncertainty. Experiments on the 300-hr WHAM noise corrupted Switchboard data suggest that factorised adaptation consistently outperforms the baseline and speaker label only adapted Conformers by up to 3.1% absolute (10.4% relative) word error rate reductions. Further analysis shows the proposed method offers potential for rapid adaption to unseen speaker-environment conditions.
Discontinuities and delayed terms are encountered in the governing equations of a large class of problems ranging from physics, engineering, medicine to economics. These systems are impossible to be properly modelled and simulated with standard Ordinary Differential Equations (ODE), or any data-driven approximation including Neural Ordinary Differential Equations (NODE). To circumvent this issue, latent variables are typically introduced to solve the dynamics of the system in a higher dimensional space and obtain the solution as a projection to the original space. However, this solution lacks physical interpretability. In contrast, Delay Differential Equations (DDEs) and their data-driven, approximated counterparts naturally appear as good candidates to characterize such complicated systems. In this work we revisit the recently proposed Neural DDE by introducing Neural State-Dependent DDE (SDDDE), a general and flexible framework featuring multiple and state-dependent delays. The developed framework is auto-differentiable and runs efficiently on multiple backends. We show that our method is competitive and outperforms other continuous-class models on a wide variety of delayed dynamical systems.
The recent release of large language model (LLM) based chatbots, such as ChatGPT, has attracted significant attention on foundation models. It is widely believed that foundation models will serve as the fundamental building blocks for future AI systems. As foundation models are in their early stages, the design of foundation model based systems has not yet been systematically explored. There is little understanding about the impact of introducing foundation models in software architecture. Therefore, in this paper, we propose a taxonomy of foundation model based systems, which classifies and compares the characteristics of foundation models and design options of foundation model based systems. Our taxonomy comprises three categories: foundation model pretraining and fine-tuning, architecture design of foundation model based systems, and responsible-AI-by-design. This taxonomy provides concrete guidance for making major design decisions when designing foundation model based systems and highlights trade-offs arising from design decisions.
During the usage phase, a technical product system is in permanent interaction with its environment. This interaction can lead to failures that significantly endanger the safety of the user and negatively affect the quality and reliability of the product. Conventional methods of failure analysis focus on the technical product system. The interaction of the product with its environment in the usage phase is not sufficiently considered, resulting in undetected potential failures of the product that lead to complaints. For this purpose, a methodology for failure identification is developed, which is continuously improved through product usage scenarios. The use cases are modelled according to a systems engineering approach with four views. The linking of the product system, physical effects, events and environmental factors enable the analysis of fault chains. These four parameters are subject to great complexity and must be systematically analysed using databases and expert knowledge. The scenarios are continuously updated by field data and complaints. The new approach can identify potential failures in a more systematic and holistic way. Complaints provide direct input on the scenarios. Unknown, previously unrecognized events can be systematically identified through continuous improvement. The complexity of the relationship between the product system and its environmental factors can thus be adequately taken into account in product development. Keywords: failure analysis, methodology, product development, systems engineering, scenario analysis, scenario improvement, environmental factors, product environment, continuous improvement.
Due to the growing complexity of modern data centers, failures are not uncommon any more. Therefore, fault tolerance mechanisms play a vital role in fulfilling the availability requirements. Multiple availability models have been proposed to assess compute systems, among which Bayesian network models have gained popularity in industry and research due to its powerful modeling formalism. In particular, this work focuses on assessing the availability of redundant and replicated cloud computing services with Bayesian networks. So far, research on availability has only focused on modeling either infrastructure or communication failures in Bayesian networks, but have not considered both simultaneously. This work addresses practical modeling challenges of assessing the availability of large-scale redundant and replicated services with Bayesian networks, including cascading and common-cause failures from the surrounding infrastructure and communication network. In order to ease the modeling task, this paper introduces a high-level modeling formalism to build such a Bayesian network automatically. Performance evaluations demonstrate the feasibility of the presented Bayesian network approach to assess the availability of large-scale redundant and replicated services. This model is not only applicable in the domain of cloud computing it can also be applied for general cases of local and geo-distributed systems.
Despite the advancement of machine learning techniques in recent years, state-of-the-art systems lack robustness to "real world" events, where the input distributions and tasks encountered by the deployed systems will not be limited to the original training context, and systems will instead need to adapt to novel distributions and tasks while deployed. This critical gap may be addressed through the development of "Lifelong Learning" systems that are capable of 1) Continuous Learning, 2) Transfer and Adaptation, and 3) Scalability. Unfortunately, efforts to improve these capabilities are typically treated as distinct areas of research that are assessed independently, without regard to the impact of each separate capability on other aspects of the system. We instead propose a holistic approach, using a suite of metrics and an evaluation framework to assess Lifelong Learning in a principled way that is agnostic to specific domains or system techniques. Through five case studies, we show that this suite of metrics can inform the development of varied and complex Lifelong Learning systems. We highlight how the proposed suite of metrics quantifies performance trade-offs present during Lifelong Learning system development - both the widely discussed Stability-Plasticity dilemma and the newly proposed relationship between Sample Efficient and Robust Learning. Further, we make recommendations for the formulation and use of metrics to guide the continuing development of Lifelong Learning systems and assess their progress in the future.
注冊地址： 北京市海淀區羊坊店路18號2幢3層301-191