Cell discovery is the procedure in which a user equipment (UE) finds a suitable base station (BS) to establish a communication link. When beamforming with antenna arrays is done at both transmitter and receiver, cell discovery in mm wave systems also involves finding the correct angle of arrival - angle of departure alignment between the UE and the detected BS. First, we consider the single BS scenario and present the mathematical model for the cell discovery problem. We present the details of the beam sweeping based techniques and explain the beam combining scheme to reduce the training overhead. We analytically characterize the performance of energy detector at the UE for both beam sweeping and beam combining methods under some channel assumptions. Further, we consider the multiple BS case where BSs transmit synchronization signals along with directional beamforming. We analyze the performance of the energy detector in this case as well. We finally present simulation studies with channels generated using generic mm wave channel emulators and draw inferences on the role of various parameters on the cell discovery performance.
相關內容
A memoryless state-dependent multiple-access channel (MAC) is considered, where two transmitters wish to convey their messages to a single receiver while simultaneously sensing (estimating) the respective states via generalized feedbacks. For this channel, an improved inner bound is provided on the \emph{fundamental rate-distortions tradeoff} which characterizes the communication rates the transmitters can achieve while simultaneously ensuring that their state-estimates satisfy desired distortion criteria. The new inner bound is based on a scheme where each transmitter codes over the generalized feedback so as to improve the state estimation at the other transmitter. This is in contrast to the schemes proposed for point-to-point and broadcast channels where coding is used only for the transmission of messages and the optimal estimators operate on a symbol-by-symbol basis on the sequences of channel inputs and feedback outputs.
Unmanned aerial vehicles (UAVs) have attracted a lot of research attention because of their high mobility and low cost in serving as temporary aerial base stations (BSs) and providing high data rates for next-generation communication networks. To protect user privacy while avoiding detection by a warden, we investigate a jammer-aided UAV covert communication system, which aims to maximize the user's covert rate with optimized transmit and jamming power. The UAV is equipped with multi-antennas to serve multi-users simultaneously and enhance the Quality of Service. By considering the general composite fading and shadowing channel models, we derive the exact probability density (PDF) and cumulative distribution functions (CDF) of the signal-to-interference-plusnoise ratio (SINR). The obtained PDF and CDF are used to derive the closed-form expressions for detection error probability and covert rate. Furthermore, the covert rate maximization problem is formulated as a Nash bargaining game, and the Nash bargaining solution (NBS) is introduced to investigate the negotiation among users. To solve the NBS, we propose two algorithms, i.e., particle swarm optimization-based and joint twostage power allocation algorithms, to achieve covertness and high data rates under the warden's optimal detection threshold. All formulated problems are proven to be convex, and the complexity is analyzed. The numerical results are presented to verify the theoretical performance analysis and show the effectiveness and success of achieving the covert communication of our algorithms.
Intelligent reflecting surfaces (IRSs) enable multiple-input multiple-output (MIMO) transmitters to modify the communication channels between the transmitters and receivers. In the presence of eavesdropping terminals, this degree of freedom can be used to effectively suppress the information leakage towards such malicious terminals. This leads to significant potential secrecy gains in IRS-aided MIMO systems. This work exploits these gains via a tractable joint design of downlink beamformers and IRS phase-shifts. In this respect, we consider a generic IRS-aided MIMO wiretap setting and invoke fractional programming and alternating optimization techniques to iteratively find the beamformers and phase-shifts that maximize the achievable weighted secrecy sum-rate. Our design concludes two low-complexity algorithms for joint beamforming and phase-shift tuning. Performance of the proposed algorithms are numerically evaluated and compared to the benchmark. The results reveal that integrating IRSs into MIMO systems not only boosts the secrecy performance of the system, but also improves the robustness against passive eavesdropping.
We introduce profile matching, a multivariate matching method for randomized experiments and observational studies that finds the largest possible unweighted samples across multiple treatment groups that are balanced relative to a covariate profile. This covariate profile can represent a specific population or a target individual, facilitating the generalization and personalization of causal inferences. For generalization, because the profile often amounts to summary statistics for a target population, profile matching does not always require accessing individual-level data, which may be unavailable for confidentiality reasons. For personalization, the profile comprises the characteristics of a single individual. Profile matching achieves covariate balance by construction, but unlike existing approaches to matching, it does not require specifying a matching ratio, as this is implicitly optimized for the data. The method can also be used for the selection of units for study follow-up, and it readily applies to multi-valued treatments with many treatment categories. We evaluate the performance of profile matching in a simulation study of the generalization of a randomized trial to a target population. We further illustrate this method in an exploratory observational study of the relationship between opioid use and mental health outcomes. We analyze these relationships for three covariate profiles representing: (i) sexual minorities, (ii) the Appalachian United States, and (iii) the characteristics of a hypothetical vulnerable patient. The method can be implemented via the new function profmatch in the designmatch package for R, for which we provide a step-by-step tutorial.
Fully-analog in-memory computing (IMC) architectures that implement both matrix-vector multiplication and non-linear vector operations within the same memory array have shown promising performance benefits over conventional IMC systems due to the removal of energy-hungry signal conversion units. However, maintaining the computation in the analog domain for the entire deep neural network (DNN) comes with potential sensitivity to interconnect parasitics. Thus, in this paper, we investigate the effect of wire parasitic resistance and capacitance on the accuracy of DNN models deployed on fully-analog IMC architectures. Moreover, we propose a partitioning mechanism to alleviate the impact of the parasitic while keeping the computation in the analog domain through dividing large arrays into multiple partitions. The SPICE circuit simulation results for a 400 X 120 X 84 X 10 DNN model deployed on a fully-analog IMC circuit show that a 94.84% accuracy could be achieved for MNIST classification application with 16, 8, and 8 horizontal partitions, as well as 8, 8, and 1 vertical partitions for first, second, and third layers of the DNN, respectively, which is comparable to the ~97% accuracy realized by digital implementation on CPU. It is shown that accuracy benefits are achieved at the cost of higher power consumption due to the extra circuitry required for handling partitioning.
This paper presents two novel hybrid beamforming (HYBF) designs for a multi-cell massive multiple-input-multiple-output (mMIMO) millimeter wave (mmWave) full duplex (FD) system under limited dynamic range (LDR). Firstly, we present a novel centralized HYBF (C-HYBF) scheme based on alternating optimization. In general, the complexity of C-HYBF schemes scales quadratically as a function of the number of users and cells, which may limit their scalability. Moreover, they require significant communication overhead to transfer complete channel state information (CSI) to the central node every channel coherence time for optimization. The central node also requires very high computational power to jointly optimize many variables for the uplink (UL) and downlink (DL) users in FD systems. To overcome these drawbacks, we propose a very low-complexity and scalable cooperative per-link parallel and distributed (P$\&$D)-HYBF scheme. It allows each mmWave FD base station (BS) to update the beamformers for its users in a distributed fashion and independently in parallel on different computational processors. The complexity of P$\&$D-HYBF scales only linearly as the network size grows, making it desirable for the next generation of large and dense mmWave FD networks. Simulation results show that both designs significantly outperform the fully digital half duplex (HD) system with only a few radio-frequency (RF) chains and achieve similar performance.
In this work, two fast multipole boundary element formulations for the linear time-harmonic acoustic analysis of finite periodic structures are presented. Finite periodic structures consist of a bounded number of unit cell replications in one or more directions of periodicity. Such structures can be designed to efficiently control and manipulate sound waves and are referred to as acoustic metamaterials or sonic crystals. Our methods subdivide the geometry into boxes which correspond to the unit cell. A boundary element discretization is applied and interactions between well separated boxes are approximated by a fast multipole expansion. Due to the periodicity of the underlying geometry, certain operators of the expansion become block Toeplitz matrices. This allows to express matrix-vector products as circular convolutions which significantly reduces the computational effort and the overall memory requirements. The efficiency of the presented techniques is shown based on an acoustic scattering problem. In addition, a study on the design of sound barriers is presented where the performance of a wall-like sound barrier is compared to the performance of two sonic crystal sound barriers.
Unmanned aerial vehicles (UAVs) are envisioned to be extensively employed for assisting wireless communications in Internet of Things (IoT) applications. On the other hand, terahertz (THz) enabled intelligent reflecting surface (IRS) is expected to be one of the core enabling technologies for forthcoming beyond-5G wireless communications that promise a broad range of data-demand applications. In this paper, we propose a UAV-mounted IRS (UIRS) communication system over THz bands for confidential data dissemination from an access point (AP) towards multiple ground user equipments (UEs) in IoT networks. Specifically, the AP intends to send data to the scheduled UE, while unscheduled UEs may pose potential adversaries. To protect information messages and the privacy of the scheduled UE, we aim to devise an energy-efficient multi-UAV covert communication scheme, where the UIRS is for reliable data transmissions, and an extra UAV is utilized as a cooperative jammer generating artificial noise (AN) to degrade unscheduled UEs detection. We then formulate a novel minimum average energy efficiency (mAEE) optimization problem, targetting to improve the covert throughput and reduce UAVs' propulsion energy consumption subject to the covertness requirement, which is determined analytically. Since the optimization problem is non-convex, we tackle it via the block successive convex approximation (BSCA) approach to iteratively solve a sequence of approximated convex sub-problems, designing the binary user scheduling, AP's power allocation, maximum AN jamming power, IRS beamforming, and both UAVs' trajectory planning. Finally, we present a low-complex overall algorithm for system performance enhancement with complexity and convergence analysis. Numerical results are provided to verify our analysis and demonstrate significant outperformance of our design over other existing benchmark schemes.
This paper investigates the interference nulling capability of reconfigurable intelligent surface (RIS) in a multiuser environment where multiple single-antenna transceivers communicate simultaneously in a shared spectrum. From a theoretical perspective, we show that when the channels between the RIS and the transceivers have line-of-sight and the direct paths are blocked, it is possible to adjust the phases of the RIS elements to null out all the interference completely and to achieve the maximum $K$ degrees-of-freedom (DoF) in the overall $K$-user interference channel, provided that the number of RIS elements exceeds some finite value that depends on $K$. Algorithmically, for any fixed channel realization we formulate the interference nulling problem as a feasibility problem, and propose an alternating projection algorithm to efficiently solve the resulting nonconvex problem with local convergence guarantee. Numerical results show that the proposed alternating projection algorithm can null all the interference if the number of RIS elements is only slightly larger than a threshold of $2K(K-1)$. For the practical sum-rate maximization objective, this paper proposes to use the zero-forcing solution obtained from alternating projection as an initial point for subsequent Riemannian conjugate gradient optimization and shows that it has a significant performance advantage over random initializations. For the objective of maximizing the minimum rate, this paper proposes a subgradient projection method which is capable of achieving excellent performance at low complexity.
In this work, we consider the distributed optimization of non-smooth convex functions using a network of computing units. We investigate this problem under two regularity assumptions: (1) the Lipschitz continuity of the global objective function, and (2) the Lipschitz continuity of local individual functions. Under the local regularity assumption, we provide the first optimal first-order decentralized algorithm called multi-step primal-dual (MSPD) and its corresponding optimal convergence rate. A notable aspect of this result is that, for non-smooth functions, while the dominant term of the error is in $O(1/\sqrt{t})$, the structure of the communication network only impacts a second-order term in $O(1/t)$, where $t$ is time. In other words, the error due to limits in communication resources decreases at a fast rate even in the case of non-strongly-convex objective functions. Under the global regularity assumption, we provide a simple yet efficient algorithm called distributed randomized smoothing (DRS) based on a local smoothing of the objective function, and show that DRS is within a $d^{1/4}$ multiplicative factor of the optimal convergence rate, where $d$ is the underlying dimension.
小貼士
登錄享
相關主題
注冊地址： 北京市海淀區羊坊店路18號2幢3層301-191