亚洲男人的天堂2018av,欧美草比,久久久久久免费视频精选,国色天香在线看免费,久久久久亚洲av成人片仓井空

The multi-antenna coded caching problem, where the server having $L$ transmit antennas communicating to $K$ users through a wireless broadcast link, is addressed. In the problem setting, the server has a library of $N$ files, and each user is equipped with a dedicated cache of capacity $M$. The idea of extended placement delivery array (EPDA), an array which consists of a special symbol $\star$ and integers in a set $\{1,2,\dots,S\}$, is proposed to obtain a novel solution for the aforementioned multi-antenna coded caching problem. From a $(K,L,F,Z,S)$ EPDA, a multi-antenna coded caching scheme with $K$ users, and the server with $L$ transmit antennas, can be obtained in which the normalized memory $\frac{M}{N}=\frac{Z}{F}$, and the delivery time $T=\frac{S}{F}$. The placement delivery array (for single-antenna coded caching scheme) is a special class of EPDAs with $L=1$. For the multi-antenna coded caching schemes constructed from EPDAs, it is shown that the maximum possible Degree of Freedom (DoF) that can be achieved is $t+L$, where $t=\frac{KM}{N}$ is an integer. Furthermore, two constructions of EPDAs are proposed: a) $ K=t+L$, and b) $K=nt+(n-1)L, \hspace{0.1cm}L\geq t$, where $n\geq 2$ is an integer. In the resulting multi-antenna schemes from those EPDAs achieve the full DoF, while requiring a subpacketization number $\frac{K}{\text{gcd}(K,t,L)}$. This subpacketization number is less than that required by previously known schemes in the literature.

相關內容

服務器,也稱伺服器,是提供計算服務的設備。由于服務器需要響應服務請求,并進行處理,因此一般來說服務器應具備承擔服務并且保障服務的能力。
服務器的構成包括處理器、硬盤、內存、系統總線等,和通用的計算機架構類似,但是由于需要提供高可靠的服務,因此在處理能力、穩定性、可靠性、安全性、可擴展性、可管理性等方面要求較高。

This paper investigates a new downlink nonorthogonal multiple access (NOMA) system, where a multiantenna unmanned aerial vehicle (UAV) is powered by wireless power transfer (WPT) and serves as the base station for multiple pairs of ground users (GUs) running NOMA in each pair. An energy efficiency (EE) maximization problem is formulated to jointly optimize the WPT time and the placement for the UAV, and the allocation of the UAV's transmit power between different NOMA user pairs and within each pair. To efficiently solve this nonconvex problem, we decompose the problem into three subproblems using block coordinate descent. For the subproblem of intra-pair power allocation within each NOMA user pair, we construct a supermodular game with confirmed convergence to a Nash equilibrium. Given the intra-pair power allocation, successive convex approximation is applied to convexify and solve the subproblem of WPT time allocation and inter-pair power allocation between the user pairs. Finally, we solve the subproblem of UAV placement by using the Lagrange multiplier method. Simulations show that our approach can substantially outperform its alternatives that do not use NOMA and WPT techniques or that do not optimize the UAV location.

The most common sensing modalities found in a robot perception system are vision and touch, which together can provide global and highly localized data for manipulation. However, these sensing modalities often fail to adequately capture the behavior of target objects during the critical moments as they transition out of static, controlled contact with an end-effector to dynamic and uncontrolled motion. In this work, we present a novel multimodal visuotactile sensor that provides simultaneous visuotactile and proximity depth data. The sensor integrates an RGB camera and air pressure sensor to sense touch with an infrared time-of-flight (ToF) camera to sense proximity by leveraging a selectively transmissive soft membrane to enable the dual sensing modalities. We present the mechanical design, fabrication techniques, algorithm implementations, and evaluation of the sensor's tactile and proximity modalities. The sensor is demonstrated in three open-loop robotic tasks: approaching and contacting an object, catching, and throwing. The fusion of tactile and proximity data could be used to capture key information about a target object's transition behavior for sensor-based control in dynamic manipulation.

Collision avoidance is a widely investigated topic in robotic applications. When applying collision avoidance techniques to a mobile robot, how to deal with the spatial structure of the robot still remains a challenge. In this paper, we design a configuration-aware safe control law by solving a Quadratic Programming (QP) with designed Control Barrier Functions (CBFs) constraints, which can safely navigate a mobile robotic arm to a desired region while avoiding collision with environmental obstacles. The advantage of our approach is that it correctly and in an elegant way incorporates the spatial structure of the mobile robotic arm. This is achieved by merging geometric restrictions among mobile robotic arm links into CBFs constraints. Simulations on a rigid rod and the modeled mobile robotic arm are performed to verify the feasibility and time-efficiency of proposed method. Numerical results about the time consuming for different degrees of freedom illustrate that our method scales well with dimension.

This paper studies the application of reconfigurable intelligent surface (RIS) to cooperative non-orthogonal multiple access (C-NOMA) networks with simultaneous wireless information and power transfer (SWIPT). We aim for maximizing the rate of the strong user with guaranteed weak user's quality of service (QoS) by jointly optimizing power splitting factors, beamforming coefficients, and RIS reflection coefficients in two transmission phases. The formulated problem is difficult to solve due to its complex and non-convex constraints. To tackle this challenging problem, we first use alternating optimization (AO) framework to transform it into three subproblems, and then use the penalty-based arithmetic-geometric mean approximation (PBAGM) algorithm and the successive convex approximation (SCA)-based method to solve them. Numerical results verify the superiority of the proposed algorithm over the baseline schemes.

Spectral efficiency improvement is a key focus in most wireless communication systems and achieved by various means such as using large antenna arrays and/or advanced modulation schemes and signal formats. This work proposes to further improve spectral efficiency through combining non-orthogonal spectrally efficient frequency division multiplexing (SEFDM) systems with index modulation (IM), which can efficiently make use of the indices of activated subcarriers as communication information. Recent research has verified that IM may be used with SEFDM to alleviate inter-carrier interference (ICI) and improve error performance. This work proposes new SEFDM signal formats based on novel activation pattern designs, which limit the locations of activated subcarriers and enable a variable number of activated subcarriers in each SEFDM subblock. SEFDM-IM system designs are developed by jointly considering activation patterns, modulation schemes and signal waveform formats, with a set of solutions evaluated under different spectral efficiency scenarios. Detailed modelling of coded systems and simulation studies reveal that the proposed designs not only lead to better bit error rate (BER) but also lower peak-to-average power ratio (PAPR) and reduced computational complexity relative to other reported index-modulated systems.

We study an implicit finite-volume scheme for non-linear, non-local aggregation-diffusion equations which exhibit a gradient-flow structure, recently introduced by Bailo, Carrillo, and Hu (2020). Crucially, this scheme keeps the dissipation property of an associated fully discrete energy, and does so unconditionally with respect to the time step. Our main contribution in this work is to show the convergence of the method under suitable assumptions on the diffusion functions and potentials involved.

In large scale dynamic wireless networks, the amount of overhead caused by channel estimation (CE) is becoming one of the main performance bottlenecks. This is due to the large number users whose channels should be estimated, the user mobility, and the rapid channel change caused by the usage of the high-frequency spectrum (e.g. millimeter wave). In this work, we propose a new hybrid channel estimation/prediction (CEP) scheme to reduce overhead in time-division duplex (TDD) wireless cell-free massive multiple-input-multiple-output (mMIMO) systems. The scheme proposes sending a pilot signal from each user only once in a given number (window) of coherence intervals (CIs). Then minimum mean-square error (MMSE) estimation is used to estimate the channel of this CI, while a deep neural network (DNN) is used to predict the channels of the remaining CIs in the window. The DNN exploits the temporal correlation between the consecutive CIs and the received pilot signals to improve the channel prediction accuracy. By doing so, CE overhead is reduced by at least 50 percent at the expense of negligible CE error for practical user mobility settings. Consequently, the proposed CEP scheme improves the spectral efficiency compared to the conventional MMSE CE approach, especially when the number of users is large, which is demonstrated numerically.

In this paper, we propose a novel concept for engineered molecular communication (MC) systems inspired by animal olfaction. We focus on a multi-user scenario where transmitters employ unique mixtures of different types of signaling molecules to convey their messages to a central receiver, which is equipped with an array comprising $R$ different types of receptors to detect the emitted molecule mixtures. The hardware complexity of an MC system employing \textit{orthogonal} molecule-receptor pairs would linearly scale with the number of signaling molecule types $Q$ (i.e., $R=Q$). Natural olfaction systems avoid such high complexity by employing arrays of \textit{cross-reactive} receptors, where each type of molecule activates multiple types of receptors and each type of receptor is predominantly activated by multiple types of molecules albeit with different activation strengths. For instance, the human olfactory system is believed to discriminate several thousands of chemicals using only a few hundred receptor types, i.e., $Q\gg R$. Motivated by this observation, we first develop an end-to-end MC channel model that accounts for the key properties of olfaction. Subsequently, we formulate the molecule mixture recovery as a convex compressive sensing (CS) problem which can be efficiently solved via available numerical solvers. Our simulation results confirm the efficiency of the proposed CS problem for the recovery of the molecular mixture signal and quantify the system performance for various system parameters.

The single shortest path algorithm is undefined for weighted finite-state automata over non-idempotent semirings because such semirings do not guarantee the existence of a shortest path. However, in non-idempotent semirings admitting an order satisfying a monotonicity condition (such as the plus-times or log semirings), the notion of shortest string is well-defined. We describe an algorithm which finds the shortest string for a weighted non-deterministic automaton over such semirings using the backwards shortest distance of an equivalent deterministic automaton (DFA) as a heuristic for A* search performed over a companion idempotent semiring, which is proven to return the shortest string. While there may be exponentially more states in the DFA, this algorithm needs to visit only a small fraction of them if determinization is performed "on the fly".

We present a pipelined multiplier with reduced activities and minimized interconnect based on online digit-serial arithmetic. The working precision has been truncated such that $p<n$ bits are used to compute $n$ bits product, resulting in significant savings in area and power. The digit slices follow variable precision according to input, increasing upto $p$ and then decreases according to the error profile. Pipelining has been done to achieve high throughput and low latency which is desirable for compute intensive inner products. Synthesis results of the proposed designs have been presented and compared with the non-pipelined online multiplier, pipelined online multiplier with full working precision and conventional serial-parallel and array multipliers. For $8, 16, 24$ and $32$ bit precision, the proposed low power pipelined design show upto $38\%$ and $44\%$ reduction in power and area respectively compared to the pipelined online multiplier without working precision truncation.

北京阿比特科技有限公司