The prospects of using a reconfigurable intelligent surface (RIS) to aid wireless communication systems have recently received much attention. Among the different use cases, the most popular one is where each element of the RIS scatters the incoming signal with a controllable phase-shift, without increasing its power. In prior literature, this setup has been analyzed by neglecting the electromagnetic interference, consisting of the inevitable incoming waves from external sources. In this letter, we provide a physically meaningful model for the electromagnetic interference that can be used as a baseline when evaluating RIS-aided communications. The model is used to show that electromagnetic interference has a non-negligible impact on communication performance, especially when the size of the RIS grows large. When the direct link is present (though with a relatively weak gain), the RIS can even reduce the communication performance. Importantly, it turns out that the SNR grows quadratically with the number of RIS elements only when the spatial correlation matrix of the electromagnetic interference is asymptotically orthogonal to that of the channel vector towards the intended receiver. Otherwise, the SNR only increases linearly.
相關內容
Future cellular networks are expected to support new communication paradigms such as machine-type communication (MTC) services along with human-type communication (HTC) services. This requires base stations to serve a large number of devices in relatively short channel coherence intervals which renders allocation of orthogonal pilot sequence per-device approaches impractical. Furthermore, the stringent power constraints, place-and-play type connectivity and various data rate requirements of MTC devices make it impossible for the traditional cellular architecture to accommodate MTC and HTC services together. Massive multiple-input-multiple-output (MaMIMO) technology has the potential to allow the coexistence of HTC and MTC services, thanks to its inherent spatial multiplexing properties and low transmission power requirements. In this work, we investigate the performance of a single cell under a shared physical channel assumption for MTC and HTC services and propose a novel scheme for sharing the time-frequency resources. The analysis reveals that MaMIMO can significantly enhance the performance of such a setup and allow the inclusion of MTC services into the cellular networks without requiring additional resources.
Reconfigurable intelligent surface (RIS) is very promising for wireless networks to achieve high energy efficiency, extended coverage, improved capacity, massive connectivity, etc. To unleash the full potentials of RIS-aided communications, acquiring accurate channel state information is crucial, which however is very challenging. For RIS-aided multiple-input and multiple-output (MIMO) communications, the existing channel estimation methods have computational complexity growing rapidly with the number of RIS units $N$ (e.g., in the order of $N^2$ or $N^3$) and/or have special requirements on the matrices involved (e.g., the matrices need to be sparse for algorithm convergence to achieve satisfactory performance), which hinder their applications. In this work, instead of using the conventional signal model in the literature, we derive a new signal model obtained through proper vectorization and reduction operations. Then, leveraging the unitary approximate message passing (UAMP), we develop a more efficient channel estimator that has complexity linear with $N$ and does not have special requirements on the relevant matrices, thanks to the robustness of UAMP. These facilitate the applications of the proposed algorithm to a general RIS-aided MIMO system with a larger $N$. Moreover, extensive numerical results show that the proposed estimator delivers much better performance and/or requires significantly less number of training symbols, thereby leading to notable reductions in both training overhead and latency.
Intelligent reflecting surfaces (IRSs) are promising enablers for next-generation wireless communications due to their reconfigurability and high energy efficiency in improving poor propagation condition of channels, e.g., limited scattering environment. However, most existing works assumed full-rank channels requiring rich scatters, which may not be available in practice. To analyze the impact of rank-deficient channels and mitigate the ensued performance loss, we consider a large-scale IRS-aided MIMO system with statistical channel state information (CSI), where the double-scattering channel is adopted to model rank deficiency. By leveraging random matrix theory (RMT), we first derive a deterministic approximation (DA) of the ergodic rate with low computational complexity and prove the existence and uniqueness of the DA parameters. Then, we propose an alternating optimization algorithm for maximizing the DA with respect to phase shifts and signal covariance matrices. Numerical results will show that the DA is tight and our proposed method can effectively mitigate the performance loss induced by channel rank deficiency.
Platoon-based driving is an idea that vehicles follow each other at a close distance, in order to increase road throughput and fuel savings. This requires reliable wireless communications to adjust the speeds of vehicles. Although there is a dedicated frequency band for vehicle-to-vehicle (V2V) communications, studies have shown that it is too congested to provide reliable transmission for the platoons. Additional spectrum resources, i.e., secondary spectrum channels, can be utilized when these are not occupied by other users. Characteristics of interference in these channels are usually location-dependent and can be stored in the so-called Radio Environment Maps (REMs). This paper aims to design REM, in order to support the selection of secondary spectrum channel for intra-platoon communications. We propose to assess the channel's quality in terms of outage probability computed, with the use of estimated interference distributions stored in REM. A frequency selection algorithm that minimizes the number of channel switches along the planned platoon route is proposed. Additionally, the REM creation procedure is shown that reduces the number of database entries using (Density-Based Spatial Clustering of Applications with Noise) DBSCAN algorithm. The proposals are tested using real IQ samples captured on a real road. Application of the DBSCAN clustering to the constructed REM provided 7% reduction in its size. Utilization of the proposed channel selection algorithm resulted in a 35 times reduction of channel switches concerning channel assignment performed independently in every location.
We prove a bound of $O( k (n+m)\log^{d-1})$ on the number of incidences between $n$ points and $m$ axis parallel boxes in $\mathbb{R}^d$, if no $k$ boxes contain $k$ common points. That is, the incidence graph between the points and the boxes does not contain $K_{k,k}$ as a subgraph. This new bound improves over previous work by a factor of $\log^d n$, for $d >2$. We also study the variant of the problem for points and halfspaces, where we use shallow cuttings to get a near linear bound in two and three dimensions.
The semiparametric estimation approach, which includes inverse-probability-weighted and doubly robust estimation using propensity scores, is a standard tool for marginal structural models used in causal inference, and it is rapidly being extended in various directions. On the other hand, although model selection is indispensable in statistical analysis, an information criterion for selecting an appropriate marginal structure has just started to be developed. In this paper, we derive an Akaike information type of criterion on the basis of the original definition of the information criterion. Here, we define a risk function based on the Kullback-Leibler divergence as the cornerstone of the information criterion and treat a general causal inference model that is not necessarily a linear one. The causal effects to be estimated are those in the general population, such as the average treatment effect on the treated or the average treatment effect on the untreated. In light of the fact that this field attaches importance to doubly robust estimation, which allows either the model of the assignment variable or the model of the outcome variable to be wrong, we make the information criterion itself doubly robust so that either one can be wrong and it will still be a mathematically valid criterion. In simulation studies, we compare the derived criterion with an existing criterion obtained from a formal argument and confirm that the former outperforms the latter. Specifically, we check that the divergence between the estimated structure from the derived criterion and the true structure is clearly small in all simulation settings and that the probability of selecting the true or nearly true model is clearly higher. Real data analyses confirm that the results of variable selection using the two criteria differ significantly.
Intelligent reflecting surface (IRS) has emerged as a promising technique to enhance wireless communication performance cost effectively. The existing literature has mainly considered IRS being deployed near user terminals to improve their performance. However, this approach may incur a high cost if IRSs need to be densely deployed in the network to cater to random user locations. To avoid such high deployment cost, in this paper we consider a new IRS aided wireless network architecture, where IRSs are deployed in the vicinity of each base station (BS) to assist in its communications with distributed users regardless of their locations. Besides significantly enhancing IRSs' signal coverage, this scheme helps reduce the IRS associated channel estimation overhead as compared to conventional user-side IRSs, by exploiting the nearly static BS-IRS channels over short distance. For this scheme, we propose a new two stage transmission protocol to achieve IRS channel estimation and reflection optimization for uplink data transmission efficiently. In addition, we propose effective methods for solving the user IRS association problem based on long term channel knowledge and the selected user IRS BS cascaded channel estimation problem. Finally, all IRSs' passive reflections are jointly optimized with the BS's multi-antenna receive combining to maximize the minimum achievable rate among all users for data transmission. Numerical results show that the proposed co site IRS empowered BS scheme can achieve significant performance gains over the conventional BS without co site IRS and existing schemes for IRS channel estimation and reflection optimization, thus enabling an appealing low cost and high performance BS design for future wireless networks.
We give a new deterministic construction of integer sensing matrices that can be used for the recovery of integer-valued signals in compressed sensing. This is a family of $n \times d$ integer matrices, $d \geq n$, with bounded sup-norm and the property that no $\ell$ column vectors are linearly dependent, $\ell \leq n$. Further, if $\ell \leq o(\log n)$ then $d/n \to \infty$ as $n \to \infty$. Our construction comes from particular sets of difference vectors of point-sets in $\mathbb R^n$ that cannot be covered by few parallel hyperplanes. We construct examples of such sets on the $0, \pm 1$ grid and use them for the matrix construction. We also show a connection of our constructions to a simple version of the Tarski plank problem.
To ensure an efficient and environmentally friendly water resource management, water management associations need means for efficient water monitoring as well as novel strategies to reduce the pollution of surface and ground water. Traditionally, water management associations operate large sensor networks to suffice their needs for hydrological and meteorological measurement data to monitor and model physical processes within catchments. Implementing a comprehensive monitoring system often suffers from sparse coverage of in-situ data. Due to the evolvement of the Copernicus satellite platforms, the broader availability of satellite data provides a great potential for deriving complementary information from Earth Observation data. Although the number of satellite data platforms that provide online processing environments is growing, it is still a big challenge to integrate those platforms into traditional workflows of users from environmental domains such as hydrology. Thus, in this paper, we introduce a software architecture to facilitate the generation of Earth Observation information targeted towards hydrology. The presented WaCoDiS System comprises several microservices as well standardized interfaces that enable a platform-independent processing of satellite data. First, we discuss the contribution of Earth Observation data to water monitoring and derive several challenges regarding the facilitation of satellite data processing. We then describe our system design with a brief overview about the different system components which form an automated processing pipeline. The suitability of our system is proven as part of a pre-operational deployment for a German water management association. In addition, we demonstrate how our system is capable of integrating satellite data platforms, using the Copernicus Data and Exploitation Platform - Deutschland (CODE-DE) as a reference example.
As soon as abstract mathematical computations were adapted to computation on digital computers, the problem of efficient representation, manipulation, and communication of the numerical values in those computations arose. Strongly related to the problem of numerical representation is the problem of quantization: in what manner should a set of continuous real-valued numbers be distributed over a fixed discrete set of numbers to minimize the number of bits required and also to maximize the accuracy of the attendant computations? This perennial problem of quantization is particularly relevant whenever memory and/or computational resources are severely restricted, and it has come to the forefront in recent years due to the remarkable performance of Neural Network models in computer vision, natural language processing, and related areas. Moving from floating-point representations to low-precision fixed integer values represented in four bits or less holds the potential to reduce the memory footprint and latency by a factor of 16x; and, in fact, reductions of 4x to 8x are often realized in practice in these applications. Thus, it is not surprising that quantization has emerged recently as an important and very active sub-area of research in the efficient implementation of computations associated with Neural Networks. In this article, we survey approaches to the problem of quantizing the numerical values in deep Neural Network computations, covering the advantages/disadvantages of current methods. With this survey and its organization, we hope to have presented a useful snapshot of the current research in quantization for Neural Networks and to have given an intelligent organization to ease the evaluation of future research in this area.
小貼士
登錄享
注冊地址： 北京市海淀區羊坊店路18號2幢3層301-191