Purpose: Over the last few decades, the development of the hardware and software has enabled the application of advanced systems. In the robotics field, the UI design is an intriguing area to be explored due to the creation of devices with a wide range of functionalities in a reduced size. Moreover, the idea of using the same UI to control several systems arouses a great interest considering that this involves less learning effort and time for the users. Therefore, this paper will present a mobile application to control two industrial robots with four modes of operation. Design/methodology/approach: The smartphone was selected to be the interface due to its wide range of capabilities and the MIT Inventor App was used to create the application, whose environment is supported by Android smartphones. For the validation, ROS was used since it is a fundamental framework utilised in industrial robotics and the Arduino Uno was used to establish the data transmission between the smartphone and the board NVIDIA Jetson TX2. In MIT Inventor App, the graphical interface was created to visualize the options available in the app whereas two scripts in python were programmed to perform the simulations in ROS and carry out the tests. Findings: The results indicated that the use of the sliders to control the robots is more favourable than the Orientation Sensor due to the sensibility of the sensor and human limitations to hold the smartphone perfectly still. Another important finding was the limitations of the autonomous mode, in which the robot grabs an object. In this case, the configuration of the Kinect camera and the controllers has a significant impact on the success of the simulation. Finally, it was observed that the delay was appropriate despite the use of the Arduino UNO to transfer the data between the Smartphone and the Nvidia Jetson TX2.
相關內容
In the field of fraud detection, the availability of comprehensive and privacy-compliant datasets is crucial for advancing machine learning research and developing effective anti-fraud systems. Traditional datasets often focus on transaction-level information, which, while useful, overlooks the broader context of customer behavior patterns that are essential for detecting sophisticated fraud schemes. The scarcity of such data, primarily due to privacy concerns, significantly hampers the development and testing of predictive models that can operate effectively at the customer level. Addressing this gap, our study introduces a benchmark that contains structured datasets specifically designed for customer-level fraud detection. The benchmark not only adheres to strict privacy guidelines to ensure user confidentiality but also provides a rich source of information by encapsulating customer-centric features. We have developed the benchmark that allows for the comprehensive evaluation of various machine learning models, facilitating a deeper understanding of their strengths and weaknesses in predicting fraudulent activities. Through this work, we seek to bridge the existing gap in data availability, offering researchers and practitioners a valuable resource that empowers the development of next-generation fraud detection techniques.
Integrating Disambiguation and User Preferences into Large Language Models for Robot Motion Planning
This paper presents a framework that can interpret humans' navigation commands containing temporal elements and directly translate their natural language instructions into robot motion planning. Central to our framework is utilizing Large Language Models (LLMs). To enhance the reliability of LLMs in the framework and improve user experience, we propose methods to resolve the ambiguity in natural language instructions and capture user preferences. The process begins with an ambiguity classifier, identifying potential uncertainties in the instructions. Ambiguous statements trigger a GPT-4-based mechanism that generates clarifying questions, incorporating user responses for disambiguation. Also, the framework assesses and records user preferences for non-ambiguous instructions, enhancing future interactions. The last part of this process is the translation of disambiguated instructions into a robot motion plan using Linear Temporal Logic. This paper details the development of this framework and the evaluation of its performance in various test scenarios.
As software-intensive systems face growing pressure to comply with laws and regulations, providing automated support for compliance analysis has become paramount. Despite advances in the Requirements Engineering (RE) community on legal compliance analysis, important obstacles remain in developing accurate and generalizable compliance automation solutions. This paper highlights some observed limitations of current approaches and examines how adopting new automation strategies that leverage Large Language Models (LLMs) can help address these shortcomings and open up fresh opportunities. Specifically, we argue that the examination of (textual) legal artifacts should, first, employ a broader context than sentences, which have widely been used as the units of analysis in past research. Second, the mode of analysis with legal artifacts needs to shift from classification and information extraction to more end-to-end strategies that are not only accurate but also capable of providing explanation and justification. We present a compliance analysis approach designed to address these limitations. We further outline our evaluation plan for the approach and provide preliminary evaluation results based on data processing agreements (DPAs) that must comply with the General Data Protection Regulation (GDPR). Our initial findings suggest that our approach yields substantial accuracy improvements and, at the same time, provides justification for compliance decisions.
We present a flexible method for computing Bayesian optimal experimental designs (BOEDs) for inverse problems with intractable posteriors. The approach is applicable to a wide range of BOED problems and can accommodate various optimality criteria, prior distributions and noise models. The key to our approach is the construction of a transport-map-based surrogate to the joint probability law of the design, observational and inference random variables. This order-preserving transport map is constructed using tensor trains and can be used to efficiently sample from (and evaluate approximate densities of) conditional distributions that are required in the evaluation of many commonly-used optimality criteria. The algorithm is also extended to sequential data acquisition problems, where experiments can be performed in sequence to update the state of knowledge about the unknown parameters. The sequential BOED problem is made computationally feasible by preconditioning the approximation of the joint density at the current stage using transport maps constructed at previous stages. The flexibility of our approach in finding optimal designs is illustrated with some numerical examples inspired by disease modeling and the reconstruction of subsurface structures in aquifers.
This study explores the application of deep learning technologies in software development processes, particularly in automating code reviews, error prediction, and test generation to enhance code quality and development efficiency. Through a series of empirical studies, experimental groups using deep learning tools and control groups using traditional methods were compared in terms of code error rates and project completion times. The results demonstrated significant improvements in the experimental group, validating the effectiveness of deep learning technologies. The research also discusses potential optimization points, methodologies, and technical challenges of deep learning in software development, as well as how to integrate these technologies into existing software development workflows.
Multimodal emotion recognition (MMER) systems typically outperform unimodal systems by leveraging the inter- and intra-modal relationships between, e.g., visual, textual, physiological, and auditory modalities. This paper proposes an MMER method that relies on a joint multimodal transformer (JMT) for fusion with key-based cross-attention. This framework can exploit the complementary nature of diverse modalities to improve predictive accuracy. Separate backbones capture intra-modal spatiotemporal dependencies within each modality over video sequences. Subsequently, our JMT fusion architecture integrates the individual modality embeddings, allowing the model to effectively capture inter- and intra-modal relationships. Extensive experiments on two challenging expression recognition tasks -- (1) dimensional emotion recognition on the Affwild2 dataset (with face and voice) and (2) pain estimation on the Biovid dataset (with face and biosensors) -- indicate that our JMT fusion can provide a cost-effective solution for MMER. Empirical results show that MMER systems with our proposed fusion allow us to outperform relevant baseline and state-of-the-art methods.
Large language models (LLMs) have shown impressive effectiveness in various software engineering tasks, including automated program repair (APR). In this study, we take a deep dive into automated bug fixing utilizing LLMs. In contrast to many deep learning-based APR methods that assume known bug locations, rely on line-level localization tools, or address bug prediction and fixing in one step, our approach uniquely employs LLMs to predict bug location at the token level and subsequently utilizes them for bug fixing. This methodological separation of bug localization and fixing using different LLMs enables effective integration of diverse contextual information and improved incorporation of inductive biases. We introduce Toggle: Token-Granulated Bug Localization and Repair, a comprehensive program repair framework that integrates a bug localization model, an adjustment unit, and a bug-fixing model. Toggle takes a buggy function as input and generates a complete corrected function. We investigate various styles of prompting to the bug fixing model to identify the most effective prompts that better utilize the inductive bias and significantly outperform others. Toggle achieves the new state-of-the-art (SOTA) performance on the CodeXGLUE code refinement benchmark, and exhibits better and comparable performance on several other widely-used APR datasets, including Defects4J.
Characterizing and predicting the training performance of modern machine learning (ML) workloads on compute systems with compute and communication spread between CPUs, GPUs, and network devices is not only the key to optimization and planning but also a complex goal to achieve. The primary challenges include the complexity of synchronization and load balancing between CPUs and GPUs, the variance in input data distribution, and the use of different communication devices and topologies (e.g., NVLink, PCIe, network cards) that connect multiple compute devices, coupled with the desire for flexible training configurations. Built on top of our prior work for single-GPU platforms, we address these challenges and enable multi-GPU performance modeling by incorporating (1) data-distribution-aware performance models for embedding table lookup, and (2) data movement prediction of communication collectives, into our upgraded performance modeling pipeline equipped with inter-and intra-rank synchronization for ML workloads trained on multi-GPU platforms. Beyond accurately predicting the per-iteration training time of DLRM models with random configurations with a geomean error of 5.21% on two multi-GPU platforms, our prediction pipeline generalizes well to other types of ML workloads, such as Transformer-based NLP models with a geomean error of 3.00%. Moreover, even without actually running ML workloads like DLRMs on the hardware, it is capable of generating insights such as quickly selecting the fastest embedding table sharding configuration (with a success rate of 85%).
AI recommender systems are sought for decision support by providing suggestions to operators responsible for making final decisions. However, these systems are typically considered black boxes, and are often presented without any context or insight into the underlying algorithm. As a result, recommender systems can lead to miscalibrated user reliance and decreased situation awareness. Recent work has focused on improving the transparency of recommender systems in various ways such as improving the recommender's analysis and visualization of the figures of merit, providing explanations for the recommender's decision, as well as improving user training or calibrating user trust. In this paper, we introduce an alternative transparency technique of structuring the order in which contextual information and the recommender's decision are shown to the human operator. This technique is designed to improve the operator's situation awareness and therefore the shared situation awareness between the operator and the recommender system. This paper presents the results of a two-phase between-subjects study in which participants and a recommender system jointly make a high-stakes decision. We varied the amount of contextual information the participant had, the assessment technique of the figures of merit, and the reliability of the recommender system. We found that providing contextual information upfront improves the team's shared situation awareness by improving the human decision maker's initial and final judgment, as well as their ability to discern the recommender's error boundary. Additionally, this technique accurately calibrated the human operator's trust in the recommender. This work proposes and validates a way to provide model-agnostic transparency into AI systems that can support the human decision maker and lead to improved team performance.
Detecting carried objects is one of the requirements for developing systems to reason about activities involving people and objects. We present an approach to detect carried objects from a single video frame with a novel method that incorporates features from multiple scales. Initially, a foreground mask in a video frame is segmented into multi-scale superpixels. Then the human-like regions in the segmented area are identified by matching a set of extracted features from superpixels against learned features in a codebook. A carried object probability map is generated using the complement of the matching probabilities of superpixels to human-like regions and background information. A group of superpixels with high carried object probability and strong edge support is then merged to obtain the shape of the carried object. We applied our method to two challenging datasets, and results show that our method is competitive with or better than the state-of-the-art.
注冊地址： 北京市海淀區羊坊店路18號2幢3層301-191